Specifications for each individual gauge are as follows:
SPEEDOMETER
• Speedometer will read from 0 MPH to 200 MPH or 0 KPH to 250 KPH for the metric version.
• Reads in 1 MPH or 1 KPH increments.
• Bargragh display is jumper selectable for either 80 MPH or 120 MPH full scale reading. For t the metric version it is selectable for either 130 KPH or 190 KPH full scale reading.
TACHOMETER
• Tachometer will read from 0 RPM to 9900 RPM.
• Reads in 100 RPM increments.
• Tachometer is jumper selectable for use with either a 4, 6, or 8 cylinder engine.
• Bargragh display is jumper selectable for either 5000, 6000, or 7000 RPM full scale reading.
FUEL
• Fuel gauge will read from 0.0 to 9.9 Gallons or 0.0 to 60 Liters.
• Reads in .1 Gallon or 1 Liter increments.
• Full fuel tank reading is adjustable.
• Fuel label will blink when the fuel drops below 2.0 gallons or 7.0 Liters.
WATER TEMPERATURE
• Temperature C.° to 124° F or 30° to 255°gauge will read from 80
F°• Reads in 5 C increments.°increments or 2
• Temperature label will blink if the C.° F or 112°temperature rises above 230
OIL PRESSURE
• Oil pressure gauge will read from 0 Psi to 99 Psi or 0 to 9.9 Bar.
• Reads in 1 Psi or .1 Bar increments.
• Oil label will blink if the oil pressure rises above 79 Psi or 7.9 Bar or falls below 16 Psi or 1.6 Bar.
VOLT METER
• Voltmeter will read from 9.5 to 24.0 volts.
• Reads in .1 volt increments.
• Volts label will blink if the voltage rises above 15.4 or falls below 11.6 volts.
